How to power ON and OFF SENSAiO device ?

How to power ON and OFF SENSAiO device ?

ON/OFF mode

The device is delivered in power-off. A 5 mm or 1⁄4 inch clearance will appear between the nut ring and the process connection as illustrated below. See below illustration.

To power-on the device, simply fully screw the nut ring until there is no more gap between the nut ring and the process.



Locking Mechanism

There is an allen key (M5 x 4mm) to lock the nut ring and and process connection. 



Note :Device will automatically start broadcast in BLE mode during 30s after power-on.

Note :it is mandatory to power-off the device during storage or transportation. If the device is power-on it will automatically try to connect to a LoRaWAN gateway and drag the battery down unnecessarily.


Industrial Bluetooth advertising mode

This mode is active 30s after power-on the device. Double tap the antenna cap with your hand firmly as shown in the illustration to wake up the device in Industrial Bluetooth advertising mode. The device will advertise for 30s prior switching to LoRaWAN mode. In this mode, SENSAiO can be connected through SensaLink App (Android/Apple).

Note: Connecting to SENSAiO device will require pairing in the SensaLink app.



Below is video how to activate SENSAiO Industrial Bluetooth Advertising Mode

BLE beacon mode

To active the beacon mode, Beacon mode is always-on mode. Device will keep advertising (1 data per second) and data can be collected using Bluetooth© Gateway. This mode is used for data extraction on site or any application requiring live data pulling. Default sampling rate is set to 1 data sample per second. Refer to section 4.1 SensaLink Mobile to active Beacon Mode.

Note: Be aware that beacon mode will drag the battery down quickly (Approximately 90 days from full charge). BLE© Beacon and advertising mode are taking into account in the battery life calculation.